SUPPLY SPECIFICATION
What We Supply
Sizes, grades, mills and tolerances for our titanium range.
| Sizes | Grade families | Make / mill | Tolerance | Testing |
|---|---|---|---|---|
|
|
We source through specialist titanium suppliers. | ASTM B348 for bar · ASTM B265 for sheet and plate | Mill certificate · Chemistry · Dimensions · Mechanical tests as specified |
Processing We Do on Titanium
OneKaizen cuts titanium to length in-house. Every other operation comes through our supplier network, so you receive stock ready for your machine shop.
| Processing route | Typical scope | Output / control |
|---|---|---|
| Cut to length | Bar, sheet and plate | Length · edge condition |
| Size preparation | Through our suppliers, to your grade and form | Dimensions · surface |
| Inspection | Your ASTM grade | Chemistry · mechanical tests · certificate |
How We Supply Titanium
- 1
Confirm grade and standard
We match the grade and ASTM or AMS standard to your part and your certification needs.
Sourcing team - 2
Source the stock
We buy bar, sheet or plate from a specialist titanium supplier with a heat-traceable certificate.
Supplier network - 3
Cut to length
Stock is cut to your lengths or sheet sizes.
In-house - 4
Inspect
Chemistry, dimensions, heat marking and certificate are checked against your order.
Quality team - 5
Pack and deliver
Packed clean, tagged with grade and heat number, and shipped to your plant.
Supply chain team
Grades We Supply in Titanium
OneKaizen's main titanium grades with their nearest equivalents. Search the catalogue for any other grade.
Quality, Packing and Delivery
Quality
Mill certificate for every lot with heat traceability, chemistry and dimensional checks, and mechanical tests as specified.
Packing
Packed clean and separate from other metals, tagged with grade and heat number.
Delivery
To your plant anywhere in India by road. Export packing and documents for buyers abroad.
Minimum order
Minimum order not published. Ask us for your quantity.
Applications
Titanium Questions
What is the difference between Titanium Grade 2 and Grade 5?
Grade 2 is commercially pure titanium with good corrosion resistance and easy forming. Grade 5 is Ti-6Al-4V, about three times stronger, and is the grade for aerospace and high-load parts.
What is Grade 23 titanium?
Grade 23 is Ti-6Al-4V ELI, a higher-purity version of Grade 5. It has better toughness and is the standard grade for surgical implants.
Which titanium grade resists corrosion best?
Grade 7 and Grade 12 resist crevice corrosion better than Grade 2. Grade 2 is enough for most seawater and chemical duty.
What sizes of titanium do you supply?
Round bar from Ø 6 to 250 mm and sheet and plate from 0.5 to 100 mm thick. We also cut to length.
Is titanium difficult to machine?
It machines more slowly than steel because it holds heat at the cutting edge. Use sharp tools, low speeds and plenty of coolant.
What is Grade 9 titanium used for?
Grade 9 is Ti-3Al-2.5V. It is stronger than Grade 2, easier to form than Grade 5, and is used for tubing, bicycle frames and aerospace hydraulic lines.
Do you deliver titanium across India and export?
Yes. OneKaizen delivers to plants across India and exports to buyers abroad with packing and documents to match.
Does titanium come with a heat-traceable certificate?
Yes. Every lot ships with a mill certificate for chemistry and mechanical properties, traceable to the heat.
Sizes, grades and tolerances above are our standard range. Other sizes and grades are available on request. Final values are confirmed against the order standard and mill certificate.
