INDUSTRIES
OneKaizen supplies steel for the automotive industry, and for forging, fastener, machinery and earth-moving makers. We source the grade, process it to your drawing and deliver it to your plant.
APPLICATION / AUTOMOTIVE & AUTO COMPONENTS
OneKaizen supplies bars, wire and processed steel to automotive OEMs, tier suppliers and auto component makers. Shafts, gears, studs and pins start as bright bar in EN8, EN19, 16MnCr5, 20MnCr5 and SAE 8620, finished to the tolerance your machining line runs on.
Typical grades: EN8 · EN19 · 16MnCr5 · 20MnCr5 · SAE 8620
APPLICATION / FORGING
OneKaizen supplies forging stock as round bar and cut lengths in alloy and carbon grades such as EN8, EN19, EN24 and EN31. Peeled bar removes the decarburised skin before your press. Heavy forgings come through our forging partner.
Typical grades: EN8 · EN19 · EN24 · EN31
APPLICATION / FASTENERS & SPRINGS
OneKaizen supplies wire rod and drawn bright wire for fastener, cold heading and spring makers. We draw rod of Ø 5.5–40 mm to wire of Ø 1.5–37 mm in grades such as SWRCH, 10B21 and SAE 1006–1080.
Typical grades: SWRCH · 10B21 · SAE 1006–1080 · 100Cr6
APPLICATION / MACHINERY & GENERAL ENGINEERING
OneKaizen supplies bright bars, round bars, shafts, gear blanks and tool and die steel to machinery builders and general engineering shops. Send us the drawing and the duty, and we recommend the grade and condition.
Typical grades: EN8 · EN9 · EN24 · EN31
APPLICATION / EARTH-MOVING & HEAVY EQUIPMENT
OneKaizen supplies alloy bars, forged components and shafts to earth-moving and heavy equipment makers, where parts carry high load and shock. We source the grade from our mills and forging partners and supply it in the heat treated condition when you need it.
Typical grades: EN19 · EN24 · 42CrMo4
Grades shown are typical for each industry. Browse all steel grades, or send us your drawing and we recommend the grade. Browse steel grades ↗
INDUSTRY FAQ
Automotive shafts, studs and pins use medium carbon and alloy steels such as EN8 and EN19. Gears and transmission parts use case-hardening grades such as 16MnCr5, 20MnCr5 and SAE 8620. We supply all of them as bright bar or round bar.
Forgers commonly use EN8, EN19, EN24 and EN31, plus case-hardening and microalloyed grades. We supply them as round bar, peeled or cut to length, and source heavy forgings through our forging partner.
Fastener makers use cold heading wire in grades such as SWRCH, 10B21 and SAE 1006–1080. We draw wire rod of Ø 5.5–40 mm to bright wire of Ø 1.5–37 mm to your size and tensile range.
Earth-moving equipment uses high strength alloy steels such as EN19, EN24 and 42CrMo4 for pins, shafts and gears. They are usually supplied quenched and tempered. See our heat treated bars.
Yes. Send us the drawing, the material specification, the quantity and the delivery location. We come back with the grade, the processing route and the price.
Yes. OneKaizen supplies gear blanks, shafts and special forgings to drawing, sourced through our mills and forging partners.
Yes. OneKaizen delivers across India, and we act as a sourcing partner for buyers abroad in countries such as Italy, Spain, Turkey, Korea and Japan.
Every heat ships with an EN 10204 3.1 mill test certificate. Tensile, hardness and ultrasonic testing are available on request.
INDUSTRIAL REQUIREMENT
